I've had this problem a number of times previously, but never this bad. I just ran a custom scan and although all 50 rows are showing some information, only 9 of them have symbol names and actual numbers in the other columns. The rest of the rows have no symbol name and the columns are filled with zeros. The 9 with symbol names are not contiguous, and in this case are located at rows number 2,15,18,24,26,33,37,39,44. I've rerun the scan a bunch of times, closed the program and reopened it, and let it sit open for two hours...all with no change in the problem.

As I said, this has happened before and is not a new problem, but usually there will only be a few blank rows scattered around in the list.

Is there anything I can do about this?

Also, any chance that you're working on an updated version of the scanner...hopefully one incorporating some suggested new scans (such as scanning for symbols breaking yesterdays High or Low.)

John

Unfortunately the problem is happening again this morning (6:35am). Out of 15 rows showing numbers in a custom scan, only 4 have symbols and actual numbers...the rest have blanks for the symbols and zeros for numbers. The rows showing symbols and numbers are 7,10,11,12 although that changes are a symbol jumps around in position.

I closed the program yesterday and started it up again this morning.

John

John, are you running the scans that was included in the DTN.IQ software or are you using the "beta" version of the scans client?

---

Jay Froscheiser
DTN - Trading Markets

Sorry I forgot to mention, it's the beta version.

John

The problem stopped occuring for a few days, but today it was back, just not as bad as before...out of about 30 rows(results from a custom scan), only about 5 were blank. What do you suppose is causing this?

John