|
|
Home
Search
Register
Login
Recent Posts
| Viewing User Profile for: themike | |||||||||||||||||||||||
| About | Contact | ||||||||||||||||||||||
|
|
||||||||||||||||||||||
| Post Statistics | |||||||||||||||||||||||
|
themike has contributed to 3 posts out of 21251 total posts
(0.01%) in 5,260 days (0.00 posts per day).
20 Most recent posts:
DTN Satellite Products »
DTN satellite reciever usb support on Windows 7 (x64) Jul 18, 2010 06:14 PM
(Total replies: 3)
Thanks to everyone at DTN for helping with this issue. The fix was to reload the machine with a 32-bit edition of Window 7. Apparently this is a common problem with lots of older hardware devices that lack new drivers for a 64-bit OS.
DTN Satellite Products »
DTN satellite reciever usb support on Windows 7 (x64) Jul 11, 2010 04:17 PM
(Total replies: 3)
I checked and it is a DVB-SR1 receiver.
DTN Satellite Products »
DTN satellite reciever usb support on Windows 7 (x64) Jul 11, 2010 12:08 AM
(Total replies: 3)
I have a DTN dish/receiver that is used for DTN Meteorlogix. Previously the host PC was rented from DTN (it was an 8-9 year old Dell optiplex/Win2k). The decision was made to purchase a new PC in leiu continuing to rent. Unfortunately, the new PC has Windows 7 64bit edition loaded on it. Per instructions from tech support I downloaded AviationSentry from ftp.meteorlogix.com/pub/temp/AVS5.01.050610/ The issue is that I cannot get the USB device driver for the receiver (Velocity/DtnRcUsb.sys) to load. Is this device even supported on Windows 7? I am not sure of the receiver model is at the moment, but I know that it in addition to USB, it also has an Ethernet and a serial (8P8C) connector on the back. I have also been unable to find any information on how to use the Ethernet connection. I assume that a certain IP/netmask will need to be statically assigned on the host PC. I apologize if this is not the proper forum to ask these questions. Any information or links on how to complete the setup would be most appreciated. |
|||||||||||||||||||||||