Join the 80,000 other DTN customers who enjoy the fastest, most reliable data available. There is no better value than DTN!

(Move your cursor to this area to pause scrolling)




"You are much better than lawyers or the phone company because you answer the phone when I call! I just love your customer service." - Comment from Isreal
"There is no doubt that IQFeed is the best data provider. I am very satisfied with your services. And IQFeed is the only one that I would recommend to my friends. Now, most of them are using your product in China." - Comment from Zhezhe
"The service is great, I see a noticeable improvement in my volume profiles over [broker]'s data feed" - Comment from Larry
"I would just like to say that IQFeed version 4 is running very well and I am very happy with its performance. I would also like to extend a big thanks for the fast and efficient help that I always receive. My questions and concerns are always addressed promptly. Way to go!" - Comment from Josh in CO.
"IQFeed version 4 is a real screamer compared to anything else I have seen." - Comment from Tom
"I like you guys better than *******...much more stable and a whole lot fewer issues." - Comment from Philip
"I "bracket trade" all major news releases and I have not found one lag or glitch with DTN.IQ feed. I am very comfortable with their feed under all typical news conditions (Fed releases, employment numbers, etc)." - Comment from Public Forum
"DTN feed was the only feed that consistently matched Bloomberg feed for BID/ASK data verification work these past years......DTN feed is a must for my supply & demand based trading using Cumulative Delta" - Comment from Public Forum Post
"If you want customer service that answers the phone, your best bet is IQFeed. I cannot stop praising them or their technical support. They are always there for you, and they are quick. I have used ****** too but the best value is IQFeed." - Comment from Public Forum
"I just wanted to let u know that your data feed/service is by far the best!!! Your unfiltered tick data is excellent for reading order flow and none of your competitors delivers this quality of data!" - Comment from Peter via Email
Home  Search  Register  Login  Blogs Recent Posts

Information on DTN's Industries:
DTN Oil & Gas | DTN Trading | DTN Agriculture | DTN Weather
Follow DTN_IQFeed on Twitter
DTN.IQ/IQFeed on Twitter
DTN News and Analysis on Twitter
Viewing User Profile for: Sceptre
About Contact
Joined: Feb 4, 2015 12:15 PM
Last Post: Feb 11, 2015 08:49 AM
Last Visit: Feb 13, 2015 07:10 AM
Website:  
Location:
Occupation:
Interests:
AIM:
ICQ:
MSN IM:
Yahoo IM:
Post Statistics
Sceptre has contributed to 5 posts out of 18832 total posts (0.03%) in 1,387 days (0.00 posts per day).

20 Most recent posts:
DTN.IQ Client Software Support » No millisecond resolution data Feb 11, 2015 08:49 AM (Total replies: 7)

Hi Tim,

I removed the spaces and still get the following for the contract @ESH15:

S,CURRENT PROTOCOL,5.1,
S,SERVER CONNECTED
S,UPDATE FIELDNAMES,Symbol,Exchange ID,Last,Change,Percent Change,Total Volume,Incremental Volume,High,Low,Bid,Ask,Bid Size,Ask Size,Tick,Bid Tick,Range,Last Trade Time,Open Interest,Open,Close,Spread,Strike,Settle,Delay,Market Center,Restricted Code,Net Asset Value,Average Maturity,7 Day Yield,Last Trade Date,(Reserved),Extended Trading Last,Expiration Date,Regional Volume,Net Asset Value 2,Extended Trading Change,Extended Trading Difference,Price-Earnings Ratio,Percent Off Average Volume,Bid Change,Ask Change,Change From Open,Market Open,Volatility,Market Capitalization,Fraction Display Code,Decimal Precision,Days to Expiration,Previous Day Volume,Regions,Open Range 1,Close Range 1,Open Range 2,Close Range 2,Number of Trades Today,Bid Time,Ask Time,VWAP,TickID,Financial Status Indicator,Settlement Date,Trade Market Center,Bid Market Center,Ask Market Center,Trade Time,Available Regions

Are you able to replicate this your end? Basically the level 1 feed is not providing millisecond data. Many thanks.
Edited by Sceptre on Feb 11, 2015 at 10:03 AM
Edited by Sceptre on Feb 11, 2015 at 10:04 AM

DTN.IQ Client Software Support » No millisecond resolution data Feb 10, 2015 03:43 PM (Total replies: 7)

Hi Steve - no the response I get is the one posted above, for the particular symbol I specified.

What I am doing is no more than asking for data back from IQ Feed like so:

CString csCommand = "S, SET PROTOCOL, 5.1\r\n";

This is immediately followed by a call to SendRequestToIQFeed, passing csCommand.

csCommand.Format("w%s\r\n", m_csRequestedData);

This is also immediately followed by a call to SendRequestToIQFeed, passing csCommand.

csCommand = "S,REQUEST ALL UPDATE FIELDNAMES\r\n";

This is also immediately followed by a call to SendRequestToIQFeed, passing csCommand.

The SendRequestToIQFeed function which contains:

void CDataEngine::SendRequestToIQFeed(CString csCommand)
{
int iSentBytes = m_IQConnectSocket.Send(csCommand, csCommand.GetLength());
m_lstData1.InsertItem(0, "Successfully connected to IQFeed.");
if (iSentBytes != csCommand.GetLength())
{
m_lstData1.InsertItem(1, "Unable to send Request to IQFeed.");
}
}

DTN.IQ Client Software Support » No millisecond resolution data Feb 10, 2015 03:17 PM (Total replies: 7)

Hello Tim,

Can I check if there are differences between MSFT and @ESH15? If I ask the IQ Feed connector what it can give me in terms of fieldsets, after setting the symbol, it reports as below. None of which relate to millisecond precision. Can you test your end and suggest any enlightenment?:

S,SERVER CONNECTED
O
T,20150210 16:11:39
S,CURRENT PROTOCOL,5.1,

F,@ESH15,22,,,2088.75,1713.00,,,,,,,,,,,,,,,,,,E-MINI S&P 500 MARCH 2015,,,,,,,,,,, , ,,0,12,2,,15.36,8,43,12/26/2014,02/03/2014,,,,,,03/20/2015,,,ES,

P,@ESH15,22,2062.25,19.75,0.009669523,1362361,1,2066.50,2040.50,2062.00,2062.25,149,540,,,26,16:11:40a,2762422,2043.75,2042.50,0.25,,2042.50,,0,,,,,02/10/2015,,2062.25,03/20/2015,,,19.75,0,,,0.25,0.25,18.5,1,0.012607589,,12,2,38,1289419,,,,,,475063,16:11:40,16:11:40,,8690806,,02/09/2015,43,43,43,16:11:40,,

S,UPDATE FIELDNAMES,Symbol,Exchange ID,Last,Change,Percent Change,Total Volume,Incremental Volume,High,Low,Bid,Ask,Bid Size,Ask Size,Tick,Bid Tick,Range,Last Trade Time,Open Interest,Open,Close,Spread,Strike,Settle,Delay,Market Center,Restricted Code,Net Asset Value,Average Maturity,7 Day Yield,Last Trade Date,(Reserved),Extended Trading Last,Expiration Date,Regional Volume,Net Asset Value 2,Extended Trading Change,Extended Trading Difference,Price-Earnings Ratio,Percent Off Average Volume,Bid Change,Ask Change,Change From Open,Market Open,Volatility,Market Capitalization,Fraction Display Code,Decimal Precision,Days to Expiration,Previous Day Volume,Regions,Open Range 1,Close Range 1,Open Range 2,Close Range 2,Number of Trades Today,Bid Time,Ask Time,VWAP,TickID,Financial Status Indicator,Settlement Date,Trade Market Center,Bid Market Center,Ask Market Center,Trade Time,Available Regions

E,Last TimeMS is not a valid fieldset field.,

DTN.IQ Client Software Support » No millisecond resolution data Feb 10, 2015 01:30 PM (Total replies: 7)

The marketing material says that millisecond data is available, but when the following request is sent to DTN IQ Feed 5.0 for the symbol @ESH15:

S,SET PROTOCOL,5.0\r\n
S,SELECT UPDATE FIELDS,Symbol,Last,Last Trade Time,Bid TimeMS\r\n

Instead of getting update messages with millisecond accuracy, IQ Feed replies:

"Bid TimeMS is not a valid fieldset field."

The legacy IQ Feed 4.9 field: "Last Trade Time" is only accurate to the nearest second.

Am I missing something? Why are the documented version 5.0 fields not available? Thanks.

DTNIQ Client Software Wish List » Dynamic Fieldsets for Level 2 Data Feb 4, 2015 12:34 PM (Total replies: 0)

Wish it were possible to configure Dynamic Fieldsets for Level 2 data just like you can with Level 1 data.

Reasons:

1. Level 2 data is highly frequent.
2. Level 2 data lines can be somewhat verbose.
3. Can save DTN IQ on bandwidth and processing costs.

Thanks for considering it.


Time: Wed November 21, 2018 12:07 PM CFBB v1.2.0 15 ms.
© AderSoftware 2002-2003