Join the 80,000 other DTN customers who enjoy the fastest, most reliable data available. There is no better value than DTN!

(Move your cursor to this area to pause scrolling)




"I'm satisfied with IQFeed. It's the most reliable and fastest quote feed I have ever used. Although I'm a resident in China, it's still very fast!" - Comment from Xiaofei
"I ran your IQFeed DDE vs. my broker vs. a level II window for some slow-moving options. I would see the level II quote change, then your feed update instantaneously. My broker's DDE, however, would take as much as 30 seconds to update. I am not chasing milliseconds, but half a minute is unacceptable." - Comment from Rob
"I've never had DTN go out on me since switching. ******* would go down a couple times every month when I was using them." - Comment from Bryce in AL.
"Can I get another account from you? I am tired of ******* going down so often" - Comment from George
"I am enjoying the feed very much - so superior to the broker provided feed I was previously using." - Comment from George
"I noticed that ******* quotes locked up shortly after the interest rate announcement yesterday while yours stayed stable." - Comment from Ron in Utah
"IQFeed version 4 is a real screamer compared to anything else I have seen." - Comment from Tom
"This is an excellent value, the system is generous (allowing for 500 stocks) and stable (and really is tick-by-tick), and the support is fantastic." - Comment from Shirin via Email
"Thank you so much - awesome feed, awesome service!" - Comment from Greg via Email
"I have been using IQFeed now for a few years in MultiCharts and I have zero complaints. Very, very rare to have any data hiccups or anything at all go wrong." - Comment from Public Forum
Home  Search  Register  Login  Recent Posts
Information on DTN's Industries:
DTN Oil & Gas | DTN Trading | DTN Agriculture | DTN Weather
Follow DTNMarkets on Twitter
DTN.IQ/IQFeed on Twitter
DTN News and Analysis on Twitter
Viewing User Profile for: borsaci
About Contact
Joined: Nov 20, 2013 11:10 PM
Last Post: Jan 22, 2014 08:03 PM
Last Visit: Jan 23, 2014 07:15 AM
Website:  
Location:
Occupation:
Interests:
AIM:
ICQ:
MSN IM:
Yahoo IM:
Post Statistics
borsaci has contributed to 8 posts out of 21185 total posts (0.04%) in 3,810 days (0.00 posts per day).

20 Most recent posts:
IQFeed Developer Support » multiple client programs connected to iqfeed Jan 22, 2014 08:03 PM (Total replies: 12)

To remove Neoticker from the equation I was able to reproduce the issue with the Tradelink connector by simply starting the iqfeed client from the iqlink launcher then trying to connect with the Tradelink connector.

So I think somehow it is not detecting that the iqfeed client is already logged in.

IQFeed Developer Support » multiple client programs connected to iqfeed Jan 22, 2014 10:31 AM (Total replies: 12)

if the problem is in fact Neoticker, then i'm guessing i'd have issues in the case where I turn on the Tradelink connector before Neoticker.
So far doing this seems to allow both to run fine together with the IQFeed client.

My hunch, and it is just that, is that the Tradelink connector is trying to load IQFeed client again which poses a problem since it's already loaded and authenticated.

I will ask Pracplay support to weight in.

IQFeed Developer Support » multiple client programs connected to iqfeed Jan 22, 2014 09:05 AM (Total replies: 12)

I'm on Neoticker v4.60 Build 4

I'll check out the link shortly. thanks

IQFeed Developer Support » multiple client programs connected to iqfeed Jan 22, 2014 08:10 AM (Total replies: 12)

support@pracplay.com

However I'm working with them directly, and they also have a login on the forum. I can have them reply to this thread if that's better.

thanks

IQFeed Developer Support » multiple client programs connected to iqfeed Jan 22, 2014 12:02 AM (Total replies: 12)

can Tradelink/Pracplay post here to get support for what to do in their code?
or is there a different channel for this?

thanks for your reply

IQFeed Developer Support » multiple client programs connected to iqfeed Jan 21, 2014 11:30 AM (Total replies: 12)

I am trying to have two programs that both connect to IQFeed at the same time.
One is Neoticker, the other is Pracplay/Tradelink that has a iqfeed connector built

When I try to connect with Tradelink and Neoticker is already connected, I cannot connect.
However when I do the reverse order, Neoticker can connect fine and they are both pulling data.

I assume therefore the problem is with the Tradelink connector not handling the fact that Neoticker already has loaded iqfeed and is logged in.

We get an error in the Tradelink connector log as such:
 235530: l1 error: The IAsyncResult object was not returned from the corresponding asynchronous method on this class.
Parameter name: asyncResult   at System.Net.Sockets.Socket.EndReceive(IAsyncResult asyncResult, SocketError& errorCode)
   at System.Net.Sockets.Socket.EndReceive(IAsyncResult asyncResult)
   at IQFeedBroker.IQFeedHelper.OnReceiveData(IAsyncResult result)


Can you advise how to allow for supporting existing connections in the code?

thanks

DTN.IQ Client Software Support » multiple versions of iqfeed clients on 1 machine Nov 20, 2013 11:46 PM (Total replies: 2)

actually I no longer need this as both programs seem to support the latest.

thanks for your reply though.

regards

DTN.IQ Client Software Support » multiple versions of iqfeed clients on 1 machine Nov 20, 2013 11:13 PM (Total replies: 2)

Hi,

I need to be able to run multiple versions of the client on one machine due to one program I use requiring an older version and another requiring version 5.

Is there anyway to allow this? Currently when I try to install 5 it tries to remove the older version.

Thanks.


Time: Thu April 25, 2024 9:39 AM CFBB v1.2.0 7 ms.
© AderSoftware 2002-2003